Laboratory glassware washer, this highly anticipated fully automatic laboratory cleaning equipment, is bringing convenience to laboratory workers with its vessel cleaning performance. This reduces the burden of manual cleaning while ensuring operator safety from chemical residues. However, just like any machine, the daily maintenance and upkeep of the bottle washing machine is equally important, which is directly related to the cleaning effect and service life of the machine. Troubleshooting and resolution are an indispensable part of maintenance. Next, let’s discuss the common problems you may encounter when using the bottle washing machine and their solutions.

Problem 1: When using homemade cleaning agents or dishwashing liquids for cleaning, the bottle washing machine may report an error.

Solution: It is recommended to use a special cleaning agent for glasswar washing mahcine. Homemade or ordinary detergents may contain surfactants. During the cleaning process, a large amount of foam will be generated due to mechanical force, resulting in uneven cleaning, which will affect the cleaning pressure in the cavity and cause an error message. Therefore, be sure to choose a cleaning agent specifically designed for bottle washer.

Question 2: The cleaning temperature of the bottle washing machine can usually reach 95°C, which may have an impact on some measuring bottles.

Solution: Our bottle washing machine provides a rich selection of cleaning programs, with a total of 35 standard programs to meet the cleaning needs of different bottles and dishes. In particular, we have designed a low-temperature cleaning program for measuring bottles and vessels. For users with special needs, we can also customize suitable cleaning procedures under the guidance of the manufacturer.

Question 3: During the cleaning process, do bottles and dishes sometimes become scratched?

Solution: There will be no scratches. Our bottle washing machine basket racks are equipped with professional protective grips. The surface of the guard grips adopts PP protection technology to effectively protect the safety of bottles and dishes under the action of cleaning mechanical force and prevent scratches. happened.

Question 4: Many laboratories use purified water for rinsing during cleaning. Does this require manual adjustment of different water inlet methods?

Solution: Our bottle washing machine program has preset water inlet mode, and can be connected to both tap water and purified water sources at the same time. During the cleaning process, the program will automatically adjust the inlet water source as needed without manual operation, achieving truly fully automatic cleaning.

Question 5: Does the cleaning agent of the bottle washing machine need to be put in manually in advance?

Solution: No need to manually add cleaning agents. Our bottle washing machines are equipped with automatic cleaning agent addition and cleaning agent monitoring systems. When the amount of cleaning agent used is insufficient, the system will automatically remind the user to replace the cleaning agent to ensure normal use.