Users should understand that instrument care and maintenance is a basic skill. Because of good instrument maintenance, related to the intact rate of the instrument, the rate of use and the success rate of experimental teaching, etc. Therefore, dust removal and cleaning are the highlights of instrument maintenance.

1.Dust removal
The dust is mostly tiny dust particles with a small amount of static electricity. Often floating in the air, moving with the airflow, it will adhere to the object when it encounters it, and it is almost invisible. Dust attached to the model specimen will affect its color, and dust on the moving parts will increase wear. If there is dust on the electrical appliances, the serious ones will cause short circuit and electric leakage. If there is dust on the valuable precision instruments, the severe ones will make the instruments scrap.

2.Instrument cleaning
It is mainly for the cleaning of glassware. Glassware is divided into general glassware and special glassware. There are two types of dirt attached to glassware. One type can be cleaned with water, and the other type must be cleaned with special detergents. In the experiment, no matter what kind of dirt is attached to the glassware, the used utensils should be cleaned immediately.

Of course, if you want to improve the cleaning efficiency, avoid the adverse effects on the experiment and inspection results caused by the lack of cleanliness, and prevent infectious and toxic pollutants from harming the health of the operator, you can also choose a full-automatic laboratory glassware waher .  For safe and efficient cleaning equipment.

Especially in the current disease control and medical units, the inspection, analysis and decontamination centers’ tasks are urgent, difficult, dangerous, and heavy. Manual cleaning undoubtedly will increase the risk of operators’ exposure to viruses. The high-temperature and high-alkali washing environment in the inner chamber of the laboratory glassware washer can denature the protein, and the spike protein cannot be effectively contacted with the host cell, thereby inactivating the virus.

XPZ have many different cleaning modes, which can meet the different needs of customers; the cleaning speed is fast, which greatly save customer’s time. Fast drying speed, hot air ducted air supply, saving 35% time than traditional oven drying. More importantly, the 360 ° spray technology, the upper and lower spray arms has a stronger flushing force and obtains a satisfactory cleaning effect.