If you are a laboratory worker, you must know how critical it is to clean laboratory bottles. We need to use standard and reliable cleaning equipment and methods. This article will introduce the requirements and precautions for cleaning bottles in laboratory glassware washer to make the experiment more standard!

The standard cleanliness of laboratory bottle cleaning must meet the standards. The inside of the bottle must be cleaned without any stains or detergent residues. This is the premise for ensuring the accuracy of the experimental results. The integrity of the bottle is crucial. Any minor damage or scratches may affect the accuracy of the experimental results. Therefore, during the cleaning process, we must be careful to avoid any damage to the bottle. The cleaned bottles must be properly stored to avoid re-contamination. This requires us to place the bottles in a clean and sterile environment after cleaning to ensure that their cleanliness is maintained.

However, in order to give full play to the advantages of the laboratory glassware washing machine, we also need to pay attention to the following key factors:

1. Mastering the cleaning time: The length of the cleaning time directly affects the cleaning effect. Generally speaking, the longer the cleaning time, the better the cleaning effect. But too long cleaning time may also cause unnecessary wear and tear on the bottles. Therefore, we need to set the cleaning time reasonably according to the degree of contamination and material of the bottles.

2. Selection of cleaning temperature: Cleaning temperature is one of the important factors affecting the cleaning effect. Appropriate temperature can accelerate the chemical reaction of the cleaning agent and improve the cleaning efficiency.

But too high a temperature may also cause plastic bottles to deform or the cleaning agent to fail. Therefore, we need to choose the appropriate cleaning temperature according to the material characteristics of the cleaning agent and the bottles.

3. Application of mechanical force: The lab bottle washer flushes the surface of the bottles by spraying cleaning liquid to remove pollutants. Different bottles and pollutants require different spray pressures and flows. Therefore, we need to adjust the mechanical force parameters of the cleaning machine according to the specific situation to ensure that the cleaning effect meets the standard.

4. Selection of cleaning agent: Cleaning agent is one of the key factors in the cleaning process. Different cleaning agents have different chemical properties and cleaning effects. We need to choose the appropriate cleaning agent according to the type and nature of the pollutants on the bottles.

5. The quality of water used for cleaning: The laboratory has high requirements for the cleanliness of bottles and dishes. If the local water quality is too hard, a water softening system needs to be installed to prevent scale from appearing during cleaning, and most of them need to be rinsed with pure water to further improve the cleaning quality.

Cleaning laboratory glassware and bottles is a complex and meticulous task. We need to use equipment and technical means such as laboratory glassware washer to continuously improve cleaning efficiency and quality. At the same time, we also need to pay attention to every detail in the cleaning process to ensure that the cleaning effect meets the standards. Only in this way can we provide a solid and reliable guarantee for the road of scientific research and promote the continuous development of scientific research.