The laboratory automatic glassware washer is an efficient,accurate and reliable equipment for cleaning,sterilizing and drying bottles in the loboratory.The following is a detailed introduction:
Equipment composition
The lab automatic bottle washing machine usually consists of a washing unit,a rising unit,a sterilization unit and a drying unit.Among them,the wahing unit used to clean the stains on the surface of bottle,the rising unit is used to remove detergent residue,the sterilization unit is used to sterilize the bottle at high temperature,and the drying unit is used to completely dry the bottle.
The cleaning principle is to spary the cleaning agent solution onto the inner and outer surfaces of the bottle through the action of high-pressure spraying and circulating water flow,and repeatedly circulate the cleaning solution within a certain period of time to achieve the purpose of removing dirt,bacteria and other substances inside and on the surface of the bottle.Cleaning agents are usually alkaline of acidic solutions,which have good ckeaning effect and sterilization and disinfection.
Operating procedures
When using,you need tp put the bottle to be cleaned in to the device first,and then press the start button to start the atomatic cleaning procss.The whole cleaning process usually inclouldes the fellowing steps:
1.Pre-washing:In this step,the bottle is sparyed with a water column to remove large impurities and dirt on the surface.
2.Cleaning:In this step,the bottle is sprayed with washing detergent to clean the stains on the surface.
3.Rinse:In this step,the bottle is sprayed with clean water to remove detergent residue.
4.Sterilization:In this step,the bottle is heated to a high temperature to kill the bacteria in it.
The following points should be paid attention to when using the laboratory automatic bottle washing machine:
1. Read the equipment instruction manual carefully before operation to understand the working principle and operation method of the equipment.
2. Make sure the equipment is in good condition and clean, and check whether the electrical parts are working normally.
3. Choose the appropriate washing program and detergent according to the washing needs, so as to avoid the wrong operation that will cause the bottle to not be cleaned better.
4. During use, pay attention to observe the operation status of the equipment, find out problems and solve them in time.
5. After use, clean and disinfect the equipment to ensure that the equipment is in a hygienic and safe state before the next use.
6. Carry out regular maintenance and maintenance when necessary to extend the service life of the equipment.
In summary, some detailed descriptions of the machine’s structure, principle, operation and precautions are hoped to help users and friends who have just started using the bottle washing machine. For more information, please contact us for consultation.