Laboratory glassware washer is a kind of equipment specially used for cleaning glassware used in the laboratory. It can efficiently remove dirt, grease and residue on the surface of the glassware, ensuring that the cleanliness of the glassware meets the experimental requirements.

The following issues need to be noted when using the laboratory glassware washing machine:

　1. Choose the right cleaning agent: Choose the right cleaning agent according to the nature and degree of dirt of the glassware to be cleaned. Generally speaking, a special cleaning agent with low foam, easy rinsing and no residue should be used.

2.Amount of cleaning agent used: Using excessive amount of cleaning agent is not only wasteful, but may also result in poor cleaning effect. Therefore, the amount of cleaning agent used should be reasonably controlled according to the instructions for use of the equipment.

3.Cleaning temperature:The cleaning temperature has a great influence on the cleaning effect. Generally speaking, the higher the cleaning temperature, the better the cleaning effect. However, too high a temperature may damage the glassware, so the appropriate cleaning temperature should be selected according to the instructions for use of the equipment.

4.The cleaning temperature has a great influence on the cleaning effect. Generally speaking, the higher the cleaning temperature, the better the cleaning effect. However, too high a temperature may damage the glassware, so the appropriate cleaning temperature should be selected according to the instructions for use of the equipment.

5.Treatment after cleaning: After cleaning, the glassware should be taken out in time to avoid long-term immersion in the cleaning agent, which may cause corrosion or discoloration of the glassware. At the same time, the cleaning liquid in the laboratory glassware washer should be discharged to avoid the cleaning liquid remaining inside the equipment and affecting the next cleaning effect.

6.Laboratory equipment:Regularly perform maintenance and care on it, including cleaning the equipment, replacing cleaning agents, checking the operating status of the equipment, etc., to ensure the normal operation of the equipment and the cleaning effect.

7.Safe operation: When using, you should follow the operating procedures to avoid accidental injuries. For example, when putting in and taking out glassware, you should be careful to avoid glassware breaking and injuring people; when adding cleaning agents, avoid contact with skin and eyes, etc.

8.Environmental considerations: When selecting cleaning agents and treating cleaning wastewater, environmental factors should be taken into consideration. Try to choose environmentally friendly cleaning agents and treat cleaning wastewater reasonably to avoid pollution to the environment.

　In general, when using a laboratory glassware washer, you should pay attention to the above issues to ensure the cleaning effect while protecting the equipment and the environment.